The company forays into the Earthmoving segment also
SCHWING Stetter India, one of the leading concrete equipment manufacturing company is launching 16 new products and technology innovations at EXCON 2015 taking place in Bangalore from November 25th to 29th, 2015.
SCHWING Stetter India, the concrete equipment manufacturing giant has always laid emphasis on indigenizing products and introducing newer product range, always keeping in mind of the customer requirements. With product expertise of XCMG, one of the Top 5 World Renowned Construction Equipment manufacturing companies to launch an exclusive range of SCHWING-XCMG Wheel Loaders and Motorgraders in India, today. This marks the entry of SCHWING Stetter into the Earthmoving segment.
The range of new products includes:
M30Z – Batching Plant
SLM 2200 – Self Loading Mixer
RVH 18- Circular Distributor
LW 300 FN – Wheel Loader ( 3 tonne capacity)
ZL50GN- Wheel Loader (5 tonne capacity)
GR 150 – Motorgrader
In addition to this, SCHWING Stetter is launching five new upgraded products and five new innovations in electronics and automation.
The range of the newly upgraded products includes:
S43 Boom Pump : India’s largest Boom Pump mounted on a Four Axle Truck
SP1807 Stationary Pump
New canopy for stationary pumps with Aerodynamic design.
Weighbridge for Truck Mixers
Inner climbing mechanism for Tower crane
The range of new innovation in electronics and automation includes:
MCI 55 Control System for Smaller Batching Plants
MCI 100 Control System for Medium Sized Batching Plants
MCI 550 Control System for Large Sized Batching Plants including networking and GPS connectivity
Electronic dozing system for shotcreting pumps
Integrated control panels for stationary pumps
Some of the special features of the newly launched products include:
M30Z – Mobile Mixing Plants
Control System: M30-Z batching plant comes with an option of MCI 70 version 3.1 control unit
Powder Weigher: On request, the mixers are provided with a power weigher in M30-Z mixing plant
Ice Weigher: The ice weigher is used for the weighing of flake ice. At the bottom the side walls are sloped outwards which ensures the complete discharge of the container.
SLM 2200 – Self Loading Mixer
Engine: 4 cylinder, water cooled, turbo-charged after cooler diesel engine – 80.9kn @2500 rpm.
Shovel: Hydraulic cylinders activate 600L capacity loading shovel; single joystick control for easy loading and quick unloading of shovel gate operations.
Drum: Hydrostatic drum drive with high rotation for homogenous mix, drum lift and slew for discharge concrete all around the machine on any terrain.
Output: Capacity upto 8 cubic metre per hour.
RVH 18- Circular Distributor
RVH18 is a concrete distributor with a DN 125 pipeline and bend with SCHWING interchangeable couplings.
This placer boom has four self-supporting legs, foldable and easy to transport.
The roll and fold boom design with infinitely slewing base column is fixed with a prime mover electric motor. All control functions are operated by hand held remote control with emergency manual levers fitted on the valves.
The circular distributor has a horizontal reach of 18.2m and is a useful machine for spreading concrete in construction. Considering that offering a separate placing boom was expensive, Schwing Stetter found an intermediate solution to help to cut dependency on labour.
LW300FN – 3 tonne Wheel Loader
Engine: BS III Tier turbo charged engine with 500 NM @1350-1450 rpm along with 6 cylinders
Travel Speed: Max forward speed is 35 km/h and Max reverse speed is 25 km/hr. Number of forward speeds are 4 and number of reverse speeds are 2.
Axles: Fixed differential front type axle and an oscillating differential rear type axle
The wheel loader received its ARAI certification in April this year. The concrete gives a test result of 20% higher compressive strength. That comes from the engineered drum technology. It has a braking system that is capable of handling high speed. With a tipping load of 7,500kgs, it has a standard bucket capacity of 1.8 cu.m.
ZL50GN – 5 tonne Wheel Loader
The 5-tonne wheel loader is useful for operations with large and heavy loads. With an engine power of 207hp, it has a tipping load of 13,600kgs.
GR150 Motorgrader
This motor grader comes with the 6BTAA.9 6 cylinder Cummins engine. It has a two-stage fuel filtering system and is turbocharged, with dual entry to turbo charger. It has an electro hydraulic controlled power shift gear box with six forward gears and three reverse gears.
Rear Ripper: The front dozer blade and mid-mounted ripper comes as optional attachments with every grader. These are hydraulically operated and rippers can accommodate upto 11 teeth.
Overload protection worm-gear case: The torque for operating the mold board is transmitted through a technical gear box, which not only transmits the torque but also acts as an overload protection by a patented slip mechanism for the board.
Slew bearing: The slew bearing of turn table is compact in structure and fully enclosed. This gives an advantage of operating it in a dusty environment. The steel material provides lesser wear, longer service life and maintenance free structure.
Speaking on the occasion, Mr. Anand Sundaresan, Vice-Chairman & Managing Director, SCHWING Stetter India said, “Every year, we strive to increase our product range and expand into parallel product lines to suit the requirements of the construction industry. Last year, we successfully entered the material handling segment with the tower cranes and launched the Self Loading Mixers as well. At EXCON 2015 we are showcasing our latest product innovations that are developed and upgraded keeping in mind suit the current needs of the construction industry which will in turn help the customers to grow their business.”
Mr. V.G. Sakthikumar, Managing Director, SCHWING Stetter Sales & Services Pvt. Ltd said, “SCHWING Stetter has always been a pioneer in concreting equipments for the last decade in India. By keeping our customers close to us, our main focus is to understand customer requirements and match their needs by modifying existing equipment or launching newer equipments. We are also closely watching the growing infrastructure requirements in India, and are constantly focusing on improvising our technologies that will help to save time, money and improve performance. EXCON is an exhibition comprising of all of these elements and is also a platform for us to display our latest product innovations to our direct customers.”